PSRRA Classifieds

If you have items to sell, please email me at thomasp1@netzero.net with a description, price, email address, and photo if available. Whatever wording you submit will be what is posted. Listing will be based on first come, first serve. Thanks!

Looking for sprocket hubs for 1" axle, need 2 of them, quick change or the old bolt on from Azusa, looks is not an issue. $10.00 ea or less.

Need 1 triangle fuel tank for under steering shaft, desire dual out-let, but not mandatory, plastic or aluminum approx. measurements needed: 8" x 8" x 8" triangle, 4" wide. I may alter steering shaft mount points to open up some more room. Please contact Paul at nitrohead2@mindspring.com

Yamaha 100cc go-kart excellent cond. I believe it is around 1982-83 fresh top end pro. built, stand, starter, misc... I took in trade I race pro flat-track motorcyles, call or E-mail for more details. price $1800.00 o.b.o.
Castle Rock, Washington
Ph. 360-274-5216 or markstudebaker@aol.com

Enginetics 6200 brake caliper, new or nearly new condition, plus rebuild kit(s).

Please contact Steve Doty
206/783-3227
email: steven.d.doty@boeing.com
Senior Manufacturing Engineer
R-5152 Bldg 10-50? M/C 97-22
Work Phone 425/237-8068
Pager 206/416-6732

"Petrol King Fuel Saver"
Fuel Pressure Regulator
$30 USD obo

Custom-made CR80 engine sprocket
19T, 428 chain
Fits older CR80 (coarse spline, or 6 spline)
Never used
$40 USD obo

Email Lyle Cline at:
karter2000@home.com or call (604) 980-0541

Click to view full screen

RZ350. Brand new in '92. Raced 3 races. Transferred to Toronto. Can you believe they don't race enduro here!! Parked in garage ever since. Sell cheap. Also have '92 Emmick top gun. Raced 1 season. Contact dtman@istar.ca by email or phone (519)-461-0986.

Digatron DT32K1 dual display (tach, CHT) complete with spare tach sensor
$175 obo; Simpson helmet tear-offs 4 packages $20 obo; Horstman axle clutch
parts: Kwick Set clutch adjusters $50 obo, AX-6Y springs (2 sets of 6) $30
obo. Vancouver, Canada, Stan Crocker, days (604) 576-7008, eves (604)
298-3340, email scrocker@bcgas.com.

Sprint Cart for a Beginner. I'm looking for some with a a kart for sale thats probally no more then $1,500.00. An is willing to let me pay them a little at a time on it till i'm able to pay it off and pick
it up, I could probally have the cart payed for in 3 mths maybe sooner or is willing to trade a cart to a boat. The boat is a 26' cabin cruser with- galley, head, sleeps 5, marine radio, CB radio, depth and fish finder. Boat has just had "NEW" steering cable installed on it. And has a 318 Chrysler motor in it. Boat is ready to have fun with, I just don;t ever use it and would like to see someone with it who could enjoy it. Please contact me at....360-337-2542 leave message if not home or e-mail me at..
ccatpchz@home.com

1997 Pro Mirage Invader 5HP Briggs Raptor/every option/only raced Junior II
class one season/excellent condition Asking $2,375/obo. Contact RSwida@aol.com

This trailer is completely set up for storage with a built in workshop for all your needs.

Featuring:

1. Complete diamond plated floor.
2. Workbench with metal top, vise, Snap-On built in toolbox and solvent tank with pump system.
3. Storage racks and a full size storage part container with roll up door.
4. (2) Custom Tires racks.
5. Complete lighting inside with inside and outside 110v plug ends.
6. Nitrogen Air bottle rack.
7. Rubber mats.
8. Electric tongue trailer wench.
9. Full size rear ramp with two swinging rear doors and right side small swinging door.

Contact: Steve Wilkening (360) 825-6159
Work: (253) 931-9593 or Pager: (206) 906-1524
Email: Stephen.Wilkening@PSS.Boeing.com

Kart For Sale

95 Tony Esprit with 95 Kawasaki KX 125.
1999 Sprint 150 open Gold cup champion. Race Ready with lots of spares.
$3000 OBO

call or e-mail for more details. Kent, Washinton, WIll Stone (253) 520-8961 eve. (206) 575-3840 ext 3394 days.
mailto:willstone@reddotcorp.com

2 cre built kt100's both motors complete with m/mounts ,third brg supports,balanced / blueprinted horseman clutches,rlv exhaust systems,1 carb trigger and all of the tools and spare parts i have collected over the last 4 years. have won regional series in b.c. with this stuff for the last 3 years moving onto another class 1000.00 us takes it all. 20 min north of blaine
Contact Trevor at
perfonic@ max-net.com
604.946.5810

Yamaha Parts & Tools

Yamaha 787 barrel 52.70 bore $35, old style Yamaha barrel 52.60 bore $50, 2 - Walbro WB-3A carbs $50 ea., 2 - Burris 52.10 rings $10 ea., 6 - Yamaha NGK plug caps $5 ea., Digatron TS-106 Tach Sensor $15, Elkhorn Piston Cutter $50, 3 - MTE Tyrtool $15, 76T rear gear $30, Horstman axle clutch blueprinted fresh $400, 5 - Yamaha headers $15 ea., Emmick Enduro disk brake front spindles $30. All prices in $US. Will take offers on all. Stan
Crocker, Coquitlam B.C. (604) 592-7905 days, (604) 931-4223 eves, scrocker@bcgas.com.

Yamahas & DAP T-50s

New Yamaha KT 100SE blue printed & cryoed $1200, Used Yamaha $450, 2 - DAP T50s $400 ea., 2 - 787 Yamaha barrels with 52.40 & 52.70 bores $100 ea. All prices in $US. Will take offers on all. Richard Whitman, Burnaby B.C.
(604) 291-7018 whitman@lightspeed.bc.ca